Put the venue clock on your stream with a clock camera
Point a camera at the gym or stadium clock and key it into your scorebug. A new empty-box option for football, basketball and hockey keeps the crop lined up.
The game clock in the gym is the one that counts. The table official runs it, the referees watch it, and when the horn goes the period is over, whatever any other clock says. Running a second clock for the stream means someone has to start and stop it in step with the official one, every whistle, all game, and a few seconds of drift is enough for viewers at home to notice.
Plenty of streaming crews skip that job entirely. They point a second camera at the venue scoreboard, crop the picture down to the clock digits and lay it into their scorebug, so the clock on the stream is the official clock. ScoreLayer now has an option built for that setup on American football, flag football, basketball and hockey boards.
The clock camera window
Open your scoreboard's control panel and find the Clock card. At the bottom there is a new checkbox: Clock camera window. Tick it and the scorebug stops drawing its own game clock. A black box takes its place.
The box is where your camera goes. It sits exactly where the clock would be and stays the same size whatever the clock would read, so 15:00, 1:42 and 0:09 all leave the same window, and a crop you line up before tip-off still fits in the fourth quarter. The rest of the scorebug doesn't move either: team names, scores, the period, fouls and timeouts all stay where they are.
On a few styles the clock sits in a cell of its own, and there the box fills the whole cell to give the camera as much room as the design allows. That covers College and International 2024 for basketball and Heavy and Broadcast 2018 for football. On College the quarter stays visible under the box, since a camera cropped to the clock digits won't carry it.
You can still start, stop and set the clock in the control panel, and the Clock card keeps showing its time, though the scorebug won't. A pre-game countdown still shows in the box's place until the game starts, because the venue clock isn't counting down to anything yet.
What it looks like on air
Here are a few of the styles with a camera keyed into the box. The red digits are the venue clock, filmed live.
Set it up in OBS
You need a second camera aimed at the venue scoreboard, plugged into the same computer as your stream, and the ScoreLayer overlay already added to OBS as a browser source. If you haven't done that part yet, the matchday checklist walks through it.
Mount the clock camera on a tripod or a clamp where nobody will knock it. Zoom in so the digits fill as much of the picture as you can, since you'll be cropping away everything else, and the more pixels the digits have, the sharper they look on air.
Step 1: Turn on the clock camera window
In the control panel's Clock card, tick Clock camera window. The black box appears on your overlay straight away.
Step 2: Add the camera above the overlay
In OBS, add the camera as a Video Capture Device source in the same scene as your game footage. Drag it above the ScoreLayer browser source in the Sources list, so OBS draws it on top of the scorebug.
Step 3: Crop to the digits
Select the camera source, hold Alt (Option on a Mac) and drag the edges of its red frame inward. Holding the key crops instead of resizing. Crop until only the clock digits are left. If you'd rather type numbers, right-click the source, choose Filters and add a Crop/Pad filter instead.
Step 4: Add a Luma Key
Right-click the camera source and choose Filters.
Under Effect Filters, click + and choose Luma Key.
A luma key turns the dark parts of a picture transparent and keeps the bright parts. On a scoreboard that means the black board disappears and the lit digits stay, so the scorebug's black box shows through around them and the clock reads like part of the graphic.
Step 5: Tune the key for your venue
Raise Luma Min slowly. As it goes up, darker parts of the picture drop out: first the board itself, then any glare or reflections around the digits. Stop when the background is gone and the digits are still solid. Luma Min Smooth softens the edge between what is kept and what is dropped, and a little of it can hide a grainy outline.
The values in that screenshot are an example, not a setting to copy. The right numbers depend on how bright the scoreboard is, the lighting in the venue, and your camera's exposure, so they will be different in every gym and stadium, and they can change when the sun goes down at an outdoor game. The example also shows what too much looks like: the clock digits are solid, but the dimmer guest score is already starting to break up. If the digits look patchy or speckled, lower Luma Min until they are whole again.
If your clock camera lets you lock its exposure, do it. Left on auto, the camera keeps adjusting its brightness as the scene changes, and a key that was perfect at warm-up drifts during the game.
Step 6: Place it over the box
Drag the cropped camera onto the black box and resize it to fit. Pull a corner to scale it evenly, and hold Shift to stretch it if the digits need to be wider or taller. For exact positioning, select the source and press Ctrl+E (Cmd+E on a Mac) to open Edit Transform. When it's in place, lock the source with the padlock icon in the Sources list so a stray click can't move it during the game.
In vMix
The same setup works in vMix. Add the clock camera as an input, crop it to the digits in the input's settings, key out the dark background, and put it on an overlay channel above the ScoreLayer browser input. Tune the key the same way: raise it until the board drops out, and stop before the digits start to break up.
Troubleshooting
The digits are patchy or flickering
Luma Min is too high, or the camera's exposure keeps changing. Lower Luma Min a step at a time, and lock the camera's exposure if it has a manual setting. LED scoreboards can also flicker on camera when the camera's frame rate fights the LEDs' refresh rate. Matching the camera to your stream's frame rate, or trying a different shutter speed, usually settles it.
There's a grey haze around the digits
The board's background isn't dark enough to drop out completely. Raise Luma Min a little, or crop tighter so less of the board is left in the picture.
The clock sits in the wrong place after switching styles
Each style puts the box in a different spot, and some make it bigger. If you change the overlay style before a game, line the camera up again.
Our clock shows through
The camera is below the ScoreLayer browser source in the Sources list, or the box is off. Move the camera above the overlay, and check that Clock camera window is ticked in the Clock card.
Three ways to run the clock
The clock camera is one of three ways to get a game clock onto a ScoreLayer scorebug, and which one fits depends on your venue and your crew.
- Run it yourself. Start and stop the clock from the Clock card in the control panel, the same as any other part of the board. It works everywhere and needs nothing extra, but someone has to follow the official clock all game. Running the panel as a dock inside OBS, or putting the clock on a key of a Stream Deck on a paid plan, keeps the start and stop button within reach while you switch cameras.
- Film the venue clock. The setup in this post. It shows the official clock with nobody keeping it in step, and it works with any scoreboard you can point a camera at, which suits school gyms, community rinks and fields with an older board.
- Read it from the scoreboard console. If your venue's scoreboard controller has a Genius Sports ScoreLink (Sportzcast) box, an American football board on a paid plan can follow the console directly: clock, score, down and timeouts, with no camera and nobody at the control panel. That setup is in the ScoreLink post.
The clock camera window is on every plan, including the free one, for American football, flag football, basketball and hockey.
Ready to go live?
Create a free scoreboard and add it to OBS in under 2 minutes — no install required.
Create free scoreboard